2015 Exmark LZS749AKC72400

On Sale
$8,999.00
Was $9,499.00


New/Used
Used
Usage
250 Hours
Availability
In Stock
Location
UFC Farm Supply - Waconia
VIN
315603871
Stock #
61JB0255
Title
Clean
Condition
Good
Year
2015
Manufacturer
Exmark
Model
LZS749AKC72400

Overview

Dealer Insights

One year trade from local city. Great shape, one operator, low hours!

For further information on this unit contact us at 952-442-2126.

Description

Features
  • Doing More With Propane: Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.
  • Less Time At The Pump: Gas-powered S-Series models have a single 12-gallon tank with one fill location.
  • Built to Last: Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.
  • On-Board Diagnostics: Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.
  • Fewer Grease Points: With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.
  • Ultracut Series 4 Deck: This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
  • Tool-less Belt Removal: Deck and hydro belt can be installed without using any tools.
Decks
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Blades: 3 Blades at 24.50" Length
  • Cutting Heights: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • Deck Construction: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Width / Cutting Deck: 72"
Dimensions
  • Height: 70 in. (177.8 cm)
  • Length: 86.1 in. (218.7 cm)
  • Width: 84.9 in. (215.6 cm)
  • Curb Weight: 1220
Equipment
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98") diameter spindle shaft and splined blade driver.
  • Cup Holder: Standard
  • Drive Tires: 24 x 12-12, Turf Master®
  • Electrical: 12-volt battery with 20-amp alternator.
  • Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Mower Size: full
  • Parking Brake: Lever-actuated disc brake.
  • Seat: Deluxe, two tone, bolstered seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Steering Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Tractor Frame: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Power Components
  • Air Filter: Heavy-duty canister air filtration system
  • Carb Compliant: Yes
  • Casters: .50" thick caster yoke arms.
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Drive: Hydro-Drive
  • Drive Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Drive Wheel Release: Allows unit movement without engine running.
  • Engine Brand: Kohler®
  • Engine Displacement: 749
  • Engine Model: ECV749
  • Engine Series: Command™ EFI
  • Engine Speed: 3,750 rpm
  • Engine Type: Electronic Fuel Injected
  • Fuel Capacity: 12-gallon (45.4-L), single fuel tank with single fill location.
  • Fuel Indicator: Yes - electronic Sender
  • PTO Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Speed: Infinitely variable speed selection from 0-10.0 mph (16 kmph) forward, 0-6.0 mph (9.7 kmph) reverse.
  • Fuel Type: Gas EFI

Specs

Engine

Engine Manufacturer
Kohler®
Engine Type
ECV749
Displacement
749 cc

General

Transmission
Hydro-Drive
Wheel Size
Front: 13 x 6.5-6; Drive: 24 x 12-12
Fuel Capacity
12 gal. (45.4 L)

Deck

Deck Size
72 in.
Discharge Type
Side; Optional: Bag, Mulch